Krugerville, TX Heating & AC Repair, Installation and HVAC Service

In Krugerville, TX, I cleaned a home’s ductwork system using a Rotobrush duct cleaning machine. The ducts were vacuumed to remove dust, debris, and allergens. I sealed all vents afterward, improving indoor air quality and airflow efficiency throughout the home.

I completed a heat tune-up on a Carrier gas furnace for a customer in Krugerville. First, I inspected and cleaned the flame sensor and burners to maintain proper combustion. I then tested the blower motor for optimal airflow and ensured the gas pressure was within manufacturer specifications. I also verified the heat exchanger was free from cracks. Lastly, I adjusted the thermostat settings and tested the system’s overall operation to confirm proper heating performance throughout the home.

I completed a repair on a Carrier HVAC system today in Krugerville. The unit was experiencing airflow issues due to a faulty blower motor. I replaced the motor with a new OEM part and inspected the evaporator coil for debris, which was also cleaned. After testing the system, it is now running efficiently with restored airflow and cooling capacity.

I inspected an HVAC system that wasn’t cooling properly. The issue was traced to a low refrigerant charge, likely caused by a small leak. I recharged the system with refrigerant and used a UV dye to identify the source of the leak. The unit is now cooling effectively, and I will follow up to address the leak if needed.

I performed a comprehensive air duct cleaning using a Nikro 55-gallon PD55 HEPA vacuum and rotary brush system. I cleaned all supply and return ducts, removing accumulated dust and debris. I also sanitized the ductwork using an EPA-registered disinfectant fog. Finally, I replaced the air filter with a new MERV 13 filter.

Completed the installation of a Rheem Prestige Series RA20 AC unit. Connected the system to the existing ductwork and ensured all electrical connections were secure and up to code. Installed a new programmable thermostat for precise temperature control and energy efficiency. Charged the system with R-410A refrigerant and tested for optimal performance. Proper installation is key to maximizing efficiency and longevity. For professional Rheem AC installations, contact us for reliable and expert HVAC solutions.

Completed AC repair involving a non-cooling unit. Diagnosed and fixed a refrigerant leak, recharged the system, and replaced a malfunctioning capacitor. Cleaned the condenser coils and replaced the clogged air filter. Ensured all electrical connections were secure and tested the system for proper cooling and efficient operation. The AC unit is now functioning optimally, providing reliable cooling performance.

Responded to an AC repair call where the unit was running constantly but not cooling. Diagnosed the issue as a refrigerant leak and a clogged air filter. Repaired the refrigerant leak and recharged the system to the correct levels. Replaced the clogged air filter to restore proper airflow. Inspected and cleaned the condenser coils. Tested the system to ensure it was cycling correctly and cooling efficiently. The AC unit is now operating normally, providing effective cooling.

I repaired a Bryant AC unit that wasn't cooling due to a low voltage short at the outdoor unit. I traced the short to a damaged wire, replaced the faulty wiring, and secured all electrical connections. Afterward, I tested the system to ensure proper voltage and operation. The AC unit is now cooling efficiently.

I performed an air duct service that involved inspecting the ductwork for any signs of damage or debris accumulation. I used a high-powered vacuum and brushes to clean the ducts, removing dust, mold, and other contaminants. I also applied a sanitizer to eliminate bacteria and viruses. To improve the system's efficiency, I identified and sealed minor leaks with mastic sealant, ensuring optimal airflow and maintaining indoor air quality.

No heat

Furnace Repair - Gas Supply Issue. Gas furnaces gas supply interrupted with gas line - checking back on client. Gas line repaired and gas is now running as needed. No further issues with the gas line or gas furnace.

Responded to a heat pump repair call for a valued client on a Goodman 2.5-ton unit. Diagnosed the issue to find a malfunction in the compressor. Conducted comprehensive tests to verify the repair's success and optimize the unit's performance. The Goodman heat pump is now restored to its best condition, providing reliable heating and cooling.

I arrived at a client's residence in Krugerville, TX to provide HVAC installation services. I installed a brand-new Carrier Central A/C unit in their home. The new system has been successfully installed. The client was really pleased with the new system's performance.

Arrived at a residential home for a scheduled HVAC system installation. The customer's current system was inoperable and it was time for a replacement. The old unit was removed and the new system was expertly installed. The new HVAC will help to reduce energy costs and provide the home with reliable temperature control all year round.

Went out to perform a new HVAC installation at a residential home. The system was expertly put into place and tested for performance upon completion. The new system is working properly and will keep the home at a comfortable temperature no matter the weather. The customer is pleased with the new unit.

Arrived at a residential home for the scheduled installation of a new HVAC system. The old unit was carefully removed and the new system and all of its components were carefully installed. The new system is running optimally and will help to improve energy efficiency in the home. The customer was pleased with the replacement.

HVAC installation service for a residential homeowner. The new unit was meticulously installed and then tested for quality performance. The HVAC is running perfectly for the home. The new system will be more reliable and will help to lower energy costs for the customer. The customer was pleased with the service.

HVAC installation service for a residential homeowner. The new unit was meticulously installed and then tested for quality performance. The HVAC is running perfectly for the home. The new system will be more reliable and will help to lower energy costs for the customer. The customer was pleased with the service.

HVAC installation service for a residential homeowner. The new unit was meticulously installed and then tested for quality performance. The HVAC is running perfectly for the home. The new system will be more reliable and will help to lower energy costs for the customer. The customer was pleased with the service.

HVAC installation service for a residential homeowner. The new unit was meticulously installed and then tested for quality performance. The HVAC is running perfectly for the home. The new system will be more reliable and will help to lower energy costs for the customer. The customer was pleased with the service.

Arrived at a residential home to repair their air conditioning system. The customer had called us because there was no airflow coming from the unit. After inspected the unit, I found debris obstructing the blower motor, which was causing the issue. I cleaned out the blower motor and replaced the filters. The system is now performing as it should for the home.

Arrived at a residential home to repair their air conditioning system. The customer had called us because there was no airflow coming from the unit. After inspected the unit, I found debris obstructing the blower motor, which was causing the issue. I cleaned out the blower motor and replaced the filters. The system is now performing as it should for the home.

Arrived at a residential home to repair their air conditioning system. The customer had called us because there was no airflow coming from the unit. After inspected the unit, I found debris obstructing the blower motor, which was causing the issue. I cleaned out the blower motor and replaced the filters. The system is now performing as it should for the home.

Arrived at a residential home to repair their air conditioning system. The customer had called us because there was no airflow coming from the unit. After inspected the unit, I found debris obstructing the blower motor, which was causing the issue. I cleaned out the blower motor and replaced the filters. The system is now performing as it should for the home.